ISO QMS Certified
"Our Science ... Your Success"

MRO Adhesive and Sealants

  • Home
  • MRO Adhesive and Sealants

MRO Industrial Adhesives

Permabond has a vast range of industrial strength products for maintenance and repair professional’s diverse applications. Whether bonding, sealing, threadlocking, retaining, gasketing, thread sealing, weld sealing or tamper proofing, Permabond has the right product for your MRO needs.

Typical Applications:

MRO adhesives

  • Threadlocking
  • Retaining
  • Gasketing
  • Thread Sealing
  • Bonding
  • Tamper-proofing

Adhesive Key Features

Permabond Anaerobics are found in tool boxes around the globe. Some features of these products are listed below, and because today’s MRO professionals are called on for much more than threadlocking, we’ve included a few industry favorites from some of our other adhesive chemistries. Please don’t hesitate to contact our technical group for help in selecting the best products for your needs.


  • Permanent
  • Removable
  • High & low strength
  • High temperature resistant
  • All prevent corrosion
  • Various viscosities from post assembly wicking grades to gap filling grades
  • NSF/ANSI 61 and WRAS certified grades


  • High temperature resistant
  • All prevent corrosion
  • Various viscosities for slip fits through to gap filling
  • Metal repair compound for spun bearings and damaged keyways


  • High temperature resistant
  • All prevent corrosion
  • Easy to dispense thixotropic grades
  • Easily removable even on soft metals like brass and aluminium

Thread sealing

  • UL listed grades
  • NSF/ANSI 61 and WRAS certified grades
  • Easy to dispense
  • Removable
  • BAM Approval for oxygen contact

Bonding, tamper proofing, plastic threadlocking

Permabond anaerobics are widely known for MRO applications, however, Permabond has a broad range of adhesive and sealant types to suit many other applications including cyanoacrylates, UV curables, flexible adhesives, and structural adhesives.

  • Permabond 743 flexible cyanoacrylate for threadlocking plastics
  • Permabond 910 the original instant adhesive for metal bonding
  • Permabond 2011 gap filling instant adhesive is ideal for vertical bonds
  • Permabond ET500 two part epoxy with easy mixing dispenser
  • Permabond ASC10 to speed anaerobic cure
  • Permabond CSA-NF nonflammable instant adhesive accelerator

Contact Permabond and let our technical team help determine the best product for your needs.


Contact us for more information

Product Brochure (PDF)

Contact Us

 Your information is always kept private


Recent Blogs

Permabond’s Structural Epoxy Adhesives for Stainless Steel

Permabond launches high strength structural adhesives for tarnish free bonding of stainless steel. Available in convenient 1:1 dual cartridges, once mixed via static mixer nozzle, these adhesives achieve full cure at room temperature (...

Read more
How To Bond Plastic To Metal

There are metal adhesives and plastic adhesives but what to do when you want to bond plastic to metal? There are metal adhesives that bond some plastics and plastic adhesives that bond some metals. The specific substrates, as well as the surf...

Read more
Permabond at JEC World Paris

Day 2 of JEC World Paris. Permabond is in the UK pavilion in hall 6, stand S50, and is busy helping to find bonding solutions for a diverse range of composites applications (honeycomb panels, carbon fibre automotive components, marine app...

Read more
Permabond 2K Primer and Adhesion Promoter

Permabond 2K Primer is a dual purpose product, which indicates whether or not sufficient surface preparation has been carried out and contains an adhesion promoter to increase bond strength.  It is ideal for preparing metal, glass, plastic, ...

Read more
Join Permabond at Design 2 Part in Grapevine TX

Join Permabond March 13th and 14th at the Design-2-Part Manufacturing Show at the Gaylord Texan Convention Center. Register here and visit Permabond in booth number  223.  

Read more
Permabond returns to Southern Manufacturing & Electronics, Farnborough

Off to a busy start at Southern Manufacturing & Electronics! Visit us on A165 right by the entrance to find out how to maximise your adhesive's performance with Permabond 2K Primer, bond polypropylene/polyethylene WITHOUT surface prep...

Read more
Metal Bonding Acrylic Adhesives

Metal Bonding Acrylic Adhesives Epoxies, Cyanoacrylates, and several other technologies provide excellent adhesion to metals.  Acrylic metal bonding adhesives are often chosen not only for the strong bonds to metals but also for the varie...

Read more
Join Permabond at Expo Manufactura

Join Permabond® Engineering Adhesives at Expo Manufactura February 5th through the 7th from 1:00 p.m. to 8:00 p.m. at Cintermex in Monterrey, N.L. Mexico Register here and visit Permabond in booth number 929! Únase a Permabond® Adhes...

Read more
Blue Center Innovation Technologies

Blue Center Innovation Technologies – Permabond’s new state of the art development, technical service & QC laboratories Misinto, Italy - 28th November 2018 Permabond has a history of developing and manufacturing engineering ...

Read more
Industrial adhesives Vs Consumer adhesives

What are industrial adhesives? How do they differ from consumer adhesives?  Strictly speaking, industrial adhesives are adhesives that are labeled for industrial use.  Various local and global bodies require industrial adhesives to include...

Read more
5-minute epoxy – more than the name implies

Recently I received a call for a 5-minute epoxy. In general terms, 5-minute epoxy is used to refer to two-component epoxy that start to set up in around 5 minutes.  But they are not all alike.  Epoxies can vary in viscosity, mix ratio, colo...

Read more
Pipe Size Diameter and Thread Sealant Use

Permabond LH050 general purpose anaerobic pipe sealant is for use on metal pipe.   Permabond LH050  is classified by Underwriters Laboratories Inc.® for use in devices handling gasoline, petroleum oils, and natural gas (pressure not over ...

Read more
Plastic Threadlockers

Threadlockers fill the space between the threads which prevents vibration loosening.    Anaerobic threadlockers are used for metal fasteners; they should not be used on plastics as metal ions are required to cure the material, and they can...

Read more
Industrial Adhesives for Dissimilar Substrates

Bonding Dissimilar Substrates It goes without saying that if you are bonding plastics use a plastic adhesive and if your bonding metal, an adhesive for metal.  It gets more complicated when you want to choose industrial adhesives to join di...

Read more
Efficient scale up – Adhesive processes

One of the questions our tech team asks engineers seeking an adhesive recommendation is “How many assemblies will you be manufacturing?”  Although from a business perspective this is nice information to have; it is critical information t...

Read more