Home
Diamond Bonding Adhesives

Diamond Bonding Adhesives

Diamond Bonding Adhesive

Diamond bonding adhesives must be rugged. Because diamond is the hardest known natural material on earth – it is often used for cutting tools for various industries which require high strength, vibration resistance, chemical resistance, and temperature resistance.

Featured Product: Permabond ES550 Diamond Bonder

Excellent adhesive strength
Excellent resistance to vibration
Easy to use – no mixing required
High shear and peel strength
Good impact strength
High temperature resistance
Good resistance to chemicals

Download the technical datasheet for ES550 for full technical information.

PERMABOND® ES550 is a single-part diamond bonding adhesive. It is an epoxy paste which is slump-resistant (does not flow) during cure. The adhesive is toughened for maximum impact resistance, along with excellent peel and shear strength. ES550 is ideal for bonding a wide range of materials including metals, ferrites, ceramics, composites, and diamond.

Directions for Use

1) The adhesive should be dispensed from the cartridge via the nozzle supplied (this can be cut to give the appropriate sized bead to cover the

bond area).

2) Apply the adhesive to one surface and avoid entrapping air.

3) Assemble parts applying sufficient pressure to ensure the adhesive spreads to cover the entirebond area.

4) Use a jig / clamp to prevent parts moving during cure.

5) It is advisable not to disturb the joint until the adhesive is fully cured.

6) Cure with heat

130° C (266°F): 75 minutes
150°C (300°F): 60 minutes
170°C (338°F): 40 minutes

Permabond adhesives are supported by a team of sales, customer service, and technical professionals. This team will assist you in selecting the proper adhesive for metal for your application or develop a product to meet your application’s requirements.

Contact Permabond to review your diamond bonding application!

Contact Name*
Company*
Permabond products are not labeled for consumer use.
Email*
Phone*
Country*
Country
State / Province*
Personal or Industrial Use*
- Personal
- Industrial
Message*

Your information is always kept private

23Mar

Permabond F201 Toughened, flexible, anaerobic sealant

Anaerobic sealants are characteristically very rigid, hard adhesives which work well in compression, torsion and shear but are notoriously brittle and unsuitable in applications where there could be peel or cleavage forces. When bonding dissi...

03Mar

FDA & EU 10/2011 Compliant Adhesive for Food Contact

PERMABOND® ET5162 is an FDA & EU 10/2011 compliant adhesive. It has been formulated to comply with both FA 175.105 and EU food contact regulations 10/2011. It is a two-part, room temperature curing epoxy adhesive, which combines high ...

14Jan

High Temperature Resistant Cyanoacrylate

Permabond introduces new high temperature resistant cyanoacrylate adhesives! PERMABOND® 825 is a low viscosity cyanoacrylate adhesive that provides higher strength at high temperature. This fast-setting cyanoacrylate bonds metals, rubbers, ...

15Dec

New no odour adhesives for low surface energy plastics

PERMABOND® is delighted to announce the launch of Permabond TA4630 and TA4631, no odour adhesives for low surface energy plastics, especially developed for difficult to bond plastics such as polypropylene, polyethylene and PTFE, witho...

18Jun

Permabond Launches UV639 High Performance Acrylic Bonder

Permabond Launches UV639 High Performance Acrylic Bonder In the world of bonding acrylic (or Perspex®, PLEXIGLASS®, PMMA as it is also known), adhesives used to join this material are often referred to as "acrylic adhesives". This shoul...

28Jun

Permabond Europe Launches TA4207 – No surface preparation!

Permabond Europe Launches TA4207 – A new versatile, high strength adhesive Permabond TA4207 expands our existing range of methyl methacrylate (MMA) adhesives, and is a 2-part, 1:1 mix ratio product, which achieves very high shear strength...

23Mar

Permabond F201 Toughened, flexible, anaerobic sealant