Home
Glass Bonding Adhesives

Glass Bonding Adhesives

Permabond UV curable glass bonding adhesives are suitable for a variety of applications on decorative and structural glass. They are excellent for bonding glass to glass or glass to metal and form very high strength bonds for load-bearing joints, such as those found in glass furniture and display cases. Flexible and stress absorbing, Permabond UV curable adhesives are available for use in applications that require substrates with different thermal expansions to be bonded. Their high optical clarity and resistance to yellowing make them very popular for “invisible joints”.

For applications where all of the adhesive can’t be exposed to UV light consider Permabond Cationic Epoxy/UV adhesives.

Typical Applications:

Furniture
Art glass
Lampshades
Bathroom cabinets
Shelving
Mirrors
Doors
Glassware
Display cabinets
Decorative window and door bevels

Adhesive Key Features

Permabond UV curable adhesives for bonding glass are suitable for a variety of uses, some of the product highlights are listed below:

Permabond UV610 provides structural strength on steel to glass.
Permabond UV620 is the product of choice for optical clarity.
Permabond UV625 is a thixotropic gel, ideal for dispensing on vertical surfaces.
Permabond UV632 is ideal for bonding acrylic.

Glass to metal

Colorless clear bond
High strength
Moisture resistance, non-yellowing
No need for unsightly fasteners – keeps a clean, seam-free finish

Glass to glass

Gel for vertical joints
“Invisible” adhesive
Rapid cure (2 sec)
Hot-water resistant

Glass to metal and acrylic

“Invisible” adhesive
Very high strength
Replaces unsightly fasteners that weaken the acrylic

Related information

Glass Adhesive – All Industry

Glass Adhesive: What is the best glue for glass?

Glass Bonding Adhesive | Industrial adhesives | UV curable adhesives

How to Prepare & Bond Glass with Industrial Adhesive

Cationic Epoxy/UV Adhesives Cure with UV Light or Heat or Both!

Product Brochure (PDF)

Contact Name*
Company*
Permabond products are not labeled for consumer use.
Email*
Phone*
Country*
Country
State / Province*
Personal or Industrial Use*
- Personal
- Industrial
Message*

Your information is always kept private

21Jul

Permabond MT3836 – Flexible, Fire Retardant and Thermally Conductive Adhesive

Permabond is delighted to announce the introduction of Permabond MT3836 - flexible, fire retardant and thermally conductive adhesive. This two-component hybrid system cures fully at room temperature to form a flexible, thermally conductive m...

17Jun

Cationic Epoxy/UV Adhesives Cure with UV Light or Heat or Both!

Permabond Europe's new cationic epoxy/uv adhesives cure with UV light or heat or both! Permabond UV7220 (black) and Permabond UV7221 (clear) are epoxy resins that cure when exposed to 365nm UV light, and they can also cure with heat like sta...

23Mar

Permabond F201 Toughened, flexible, anaerobic sealant

Anaerobic sealants are characteristically very rigid, hard adhesives which work well in compression, torsion and shear but are notoriously brittle and unsuitable in applications where there could be peel or cleavage forces. When bonding dissi...

03Mar

FDA & EU 10/2011 Compliant Adhesive for Food Contact

PERMABOND® ET5162 is an FDA & EU 10/2011 compliant adhesive. It has been formulated to comply with both FA 175.105 and EU food contact regulations 10/2011. It is a two-part, room temperature curing epoxy adhesive, which combines high pe...

14Jan

High Temperature Resistant Cyanoacrylate

Permabond introduces new high temperature resistant cyanoacrylate adhesives! PERMABOND® 825 is a low viscosity cyanoacrylate adhesive that provides higher strength at high temperature. This fast-setting cyanoacrylate bonds metals, rubbers, p...

15Dec

New no odour adhesives for low surface energy plastics

PERMABOND® is delighted to announce the launch of Permabond TA4630 and TA4631, no odour adhesives for low surface energy plastics, especially developed for difficult to bond plastics such as polypropylene, polyethylene and&nb...

18Jun

Permabond Launches UV639 High Performance Acrylic Bonder

Permabond Launches UV639 High Performance Acrylic Bonder In the world of bonding acrylic (or Perspex®, PLEXIGLASS®, PMMA as it is also known), adhesives used to join this material are often referred to as "acrylic adhesives". This sho...

28Jun

Permabond Europe Launches TA4207 – No surface preparation!

Permabond Europe Launches TA4207 – A new versatile, high strength adhesive Permabond TA4207 expands our existing range of methyl methacrylate (MMA) adhesives, and is a 2-part, 1:1 mix ratio product, which achieves very high shear strengths...