ISO QMS Certified
"Our Science ... Your Success"

Modified Epoxy and MS Polymer Adhesives

  • Home
  • Modified Epoxy and MS Polymer Adhesives

Modified Epoxy and MS Polymer Adhesives

Permabond manufactures several types of flexible adhesives to meet the growing demands of industrial engineers. Modified Epoxy and MS Polymer-based adhesive offer a high level of flexibility and each provides unique benefits. The flexibility combined with low shrinkage make them ideal for bonding thin substrates with no read-through. They are also suitable for potting electronics without exerting stress on sensitive components.

MS Polymers

Permabond MS Polymers are single component, hybrid technology adhesives that moisture cure at ambient temperature. The high elongation and flexible nature of these strong bonds meet the demands of stress from impact, peel, and expansion that can occur when bonding dissimilar materials. They have excellent environmental resistance and remain very flexible.

Modified Epoxies (MT)

Permabond Modified Epoxies are two-component hybrid technology adhesives that cure at ambient temperature. Products are available in 10:1 and 2:1 dual cartridges for dispensing through static mix tips.

Permabond MS-Polymers and Modified Epoxies form strong bonds to:

Composites, Metals, Wood, FRP, Glass, Plastics, Concrete, Masonry, Brick, and Stone.

Key Benefits include:

Paintable, Non-corrosive, Fast Tack Free Time, Adhesion to a Variety of Substrates, No primer needed, Weather Resistant – No Cracking or Splitting, Ease of Application – Use in Most Weather Conditions

The high elongation and flexible nature of these strong bonds meet the demands of stress from impact, peel, and expansion that can occur when bonding dissimilar materials. They have excellent environmental resistance and remain very flexible.

Related information

Consistent Cure – Flexible Adhesives – MS Polymers & Modified Epoxies

MS Polymer Environmental Resistance

 

Contact us for more information

Contact Us

Your information is always kept private

Products

Recent Blogs

21Jul
Permabond MT3836 – Flexible, Fire Retardant and Thermally Conductive Adhesive

Permabond is delighted to announce the introduction of Permabond MT3836 - flexible, fire retardant and thermally conductive adhesive. This two-component hybrid system cures fully at room temperature to form a flexible, thermally conductive m...

Read more
17Jun
Cationic Epoxy/UV Adhesives Cure with UV Light or Heat or Both!

Permabond Europe's new cationic epoxy/uv adhesives cure with UV light or heat or both! Permabond UV7220 (black) and Permabond UV7221 (clear) are epoxy resins that cure when exposed to 365nm UV light, and they can also cure with heat like sta...

Read more
23Mar
Permabond F201 Toughened, flexible, anaerobic sealant

Anaerobic sealants are characteristically very rigid, hard adhesives which work well in compression, torsion and shear but are notoriously brittle and unsuitable in applications where there could be peel or cleavage forces. When bonding dissi...

Read more
03Mar
FDA & EU 10/2011 Compliant Adhesive for Food Contact

PERMABOND® ET5162 is an FDA & EU 10/2011 compliant adhesive. It has been formulated to comply with both FA 175.105 and EU food contact regulations 10/2011. It is a two-part, room temperature curing epoxy adhesive, which combines high pe...

Read more
14Jan
High Temperature Resistant Cyanoacrylate

Permabond introduces new high temperature resistant cyanoacrylate adhesives! PERMABOND® 825 is a low viscosity cyanoacrylate adhesive that provides higher strength at high temperature. This fast-setting cyanoacrylate bonds metals, rubbers, p...

Read more
15Dec
New no odour adhesives for low surface energy plastics

PERMABOND® is delighted to announce the launch of Permabond TA4630 and TA4631, no odour adhesives for low surface energy plastics, especially developed for difficult to bond plastics such as polypropylene, polyethylene and&nb...

Read more
18Jun
Permabond Launches UV639 High Performance Acrylic Bonder

Permabond Launches UV639 High Performance Acrylic Bonder In the world of bonding acrylic (or Perspex®, PLEXIGLASS®, PMMA as it is also known), adhesives used to join this material are often referred to as "acrylic adhesives". This sho...

Read more
28Jun
Permabond Europe Launches TA4207 – No surface preparation!

Permabond Europe Launches TA4207 – A new versatile, high strength adhesive Permabond TA4207 expands our existing range of methyl methacrylate (MMA) adhesives, and is a 2-part, 1:1 mix ratio product, which achieves very high shear strengths...

Read more