Permabond A130

PERMABOND A130 Anaerobic Threadlocker

Designed for the locking and sealing of metal parts, Permabond A130 is ideally suited for use on components that need to be dismantled for maintenance. Giving outstanding vibration resistance it can be used to replace a wide range of mechanical locking devices. Its excellent chemical resistance makes it suitable for sealing small hydraulic and pneumatic fittings and can dramatically reduce the effects of corrosion.

Features and Benefits

  • Excellent chemical resistance
  • Vibration resistant
  • Lubricates threads for easier assembly
  • Provides corrosion protection
  • WRAS listed for contact with wholesome (potable) water
  • permabond A130permabond A130 cured

Surface Preparation Prior to Using Permabond A130


Anaerobic adhesives will tolerate a slight degree of surface contamination; however, fo best results clean, dry, and degrease surfaces. Use a suitable solvent-based cleaner (such as acetone or isopropanol.)
In general, roughened surfaces (~25μm) give higher bond strengths than polished or ground surfaces.
To reduce the curing time, especially on inactive surfaces (such as zinc, aluminum, and stainless steel), the use of Permabond A905 or ASC10 can be considered.


Directions for the use of Permabond A130

1) Prevent the tip from touching metal surfaces during application.
2) When working with through holes, dispense a bead of material across the contact length of the threads.
3) When working with blind holes, apply several drops down the threads to the bottom of the hole.
4) Assemble and torque the parts as necessary.
5) Replace the lid on the bottle to avoid contamination of the remaining liquid adhesive.

For more information, download the Technical Data Sheet.

Permabond_TDS_btn

Kontaktieren Sie uns

Weitere Informationen
Weitere Informationen
Laden Sie eine Kopie unseres ISO-Zertifikats herunter