ISO QMS Certified
"Our Science ... Your Success"

1-K Epoxidharzklebstoffe

  • Home
  • 1-K Epoxidharzklebstoffe

1-K Epoxidharzklebstoffe

Permabond single-part epoxy adhesives are suitable for bonding a wide variety of materials. They are available with a range of different viscosities and with and without metal filler. Permabond epoxies have been developed to offer a high standard of performance for demanding bonding applications.

Substrates

Permabond single-part epoxy adhesives will bond most engineering materials. They form excellent structural bonds to a wide variety of materials including metals, composites, wood and even some plastics. Permabond has developed low temperature curing single part epoxies for use on plastics which would otherwise melt or deform during the heat curing process.

Durability

These adhesives offer excellent performance at high temperatures and harsh environmental conditions, having superb resistance to strong chemicals.

Applications

Single-part epoxies are ideal for use in heavy wear-and-tear applications such as bonding tungsten carbide tools & machinery. They are ideal for replacing welding and brazing and can significantly reduce assembly production costs. For this reason their use is widespread in the heat exchanger bonding market for sealing heat exchanger tubes and end-plates. Their excellent impact and temperature resistance also make them popular for bonding electric motor magnets.

Material selection

By replacing welding or brazing, the designer can have greater freedom of choice of manufacturing materials and can bond dissimilar substrates together. This can help reduce component cost and weight and improve performance.

Process

Adhesive is available in cartridge form or in bulk to dispense via automated dispensing equipment. The adhesives cure rapidly when heated so it is necessary to use and oven to cure the adhesive (or other method such as an induction coil, infra-red or a hot air gun).

Joint design

The high shear and peel strength of the bonds, coupled with the increased stress distribution of adhesives, greatly expands joint design possibilities.

Some benefits of these epoxies include:

  • Rubber toughened for high-peel strength and impact resistance
  • No mixing required
  • Excellent environmental durability
  • Rapid cure increases production rates
  • Solvent free improves workplace safety
  • Cost savings over brazing and welding
  • Low odor improves workplace environment

Kontaktieren Sie uns f眉r weitere Informationen

Kontaktieren Sie uns

Produkte

Neueste Blogeinträge

08Jan
Join Permabond at Expo Manufactura

Join Permabond® Engineering Adhesives at Expo Manufactura February 5th through the 7th from 1:00 p.m. to 8:00 p.m. at Cintermex in Monterrey, N.L. Mexico Register here and visit Permabond in booth number 929! Únase a Permabond® Adhes...

Lesen Sie mehr
10Dec
Blue Center Innovation Technologies

Blue Center Innovation Technologies – Permabond’s new state of the art development, technical service & QC laboratories Misinto, Italy - 28th November 2018 Permabond has a history of developing and manufacturing engineering ...

Lesen Sie mehr
24Nov
Industrial adhesives Vs Consumer adhesives

What are industrial adhesives? How do they differ from consumer adhesives?  Strictly speaking, industrial adhesives are adhesives that are labeled for industrial use.  Various local and global bodies require industrial adhesives to include...

Lesen Sie mehr
23Oct
5-minute epoxy – more than the name implies

Recently I received a call for a 5-minute epoxy. In general terms, 5-minute epoxy is used to refer to two-component epoxy that start to set up in around 5 minutes.  But they are not all alike.  Epoxies can vary in viscosity, mix ratio, colo...

Lesen Sie mehr
16Oct
Pipe Size Diameter and Thread Sealant Use

Permabond LH050 general purpose anaerobic pipe sealant is for use on metal pipe.   Permabond LH050  is classified by Underwriters Laboratories Inc.® for use in devices handling gasoline, petroleum oils, and natural gas (pressure not over ...

Lesen Sie mehr
01Oct
Plastic Threadlockers

Threadlockers fill the space between the threads which prevents vibration loosening.    Anaerobic threadlockers are used for metal fasteners; they should not be used on plastics as metal ions are required to cure the material, and they can...

Lesen Sie mehr
16Sep
Industrial Adhesives for Dissimilar Substrates

Bonding Dissimilar Substrates It goes without saying that if you are bonding plastics use a plastic adhesive and if your bonding metal, an adhesive for metal.  It gets more complicated when you want to choose industrial adhesives to join di...

Lesen Sie mehr
11Sep
Efficient scale up – Adhesive processes

One of the questions our tech team asks engineers seeking an adhesive recommendation is “How many assemblies will you be manufacturing?”  Although from a business perspective this is nice information to have; it is critical information t...

Lesen Sie mehr
21Jan
Metal Bonding Acrylic Adhesives

Metal Bonding Acrylic Adhesives Epoxies, Cyanoacrylates, and several other technologies provide excellent adhesion to metals.  Acrylic metal bonding adhesives are often chosen not only for the strong bonds to metals but also for the varie...

Lesen Sie mehr