Two-Part Epoxies-Selector Guide
Below is a table representing a segment of Permabond’s complete line of Epoxy Adhesives. Contact a technical representative at Permabond to discuss your specific application requirements. We will be able to recommend the most suitable adhesive for your application.
Contact us for more information
| Grade (Click grade number for TDS) | Description | Viscosity mPa.s (cP) | Handling Time (at 23°C / 73°F) | Shear Strength MPa (psi) | Availability |
|---|---|---|---|---|---|
| ET500 | Very fast curing, clear. | 13,000-24,000 | 5-8 mins | 12-18 (1750-2600) | Worldwide |
| ET505 | Tough, structural multipurpose adhesive for bonding a wide variety of materials. | 12,000-27,000 | 3-5 hours | 18-21 (2600-3000) | Worldwide |
| ET510 | Rapid curing and flexible for excellent impact and peel resistance. | 22,000-39,000 | 20-40 mins | 8-12 (1200-1750) | Worldwide |
| ET514 | Toughened, impact resistant, high strength. | Thixotropic paste | 60-120 mins | 20-30 (2900-4350) | Worldwide |
| ET5143 | Food Grade, FDA Compliant | Thixotropic paste | 3 - 5 hours | 18-22 (2600-3200) | Worldwide |
| ET5145 | Food Grade, FDA Compliant | Thixotropic paste | 3 - 5 hours | 19-21 (2800-3000) | Worldwide |
| ET5147 | Food Grade, FDA Compliant | Thixotropic paste | 3 - 5 hours | 18-20 (26)00-3000 | Worldwide |
| ET515 | Clear and flexible, again with excellent peel and impact resistance | 12,000-22,000 | 20-30 mins | 8-12 (1160-1740) | Worldwide |
| ET536 | Toughened, thixotropic, excellent gap fill and flow control. | Thixotropic paste | 90-120 mins | 22-32 (3190-4640) | Worldwide |
| ET5365 | WRAS approved | Thixotropic paste | 2 - 4 hours | 10-14 (1450-2000) | Worldwide |
| ET538 | Toughened, thixotropic, excellent gap fill and flow control. Long pot life for large assemblies. | Thixotropic paste | 3 - 5 hours | 25-30 (3625-4350) | Worldwide |
| ET5390 | Stainless steel bonding | Thixotropic paste | 8 - 12 hours | 17-22 (2500-3200) | Worldwide |
| ET5392 | Stainless steel bonding | Thixotropic paste | 8 - 12 hours | 22-25 (3200-2600) | Worldwide |
| ET5393 | Stainless steel bonding | Thixotropic paste | 2 - 3 hours | 18-23 (2600-3300) | Worldwide |
| ET540 | High Temperature | Thixotropic paste | 150-180 mins | 22-26 N/mm² (3190-3770psi) | Worldwide |
| ET5401 | Toughened, thixotropic, excellent gap fill and flow control, high temperature resistant. | Thick paste | 60 - 90 mins | 20-30 (2900-4400) | Worldwide |
| ET5411 | High Temp Resist | Thixotropic | heat cure required | 18-22 (2600-3200) | Worldwide |
| ET5422 | Toughened | Thixotropic paste | 16 hours | 30-38 (4350-5510) | Worldwide |
| ET5428 | Composite bonding | Thixotropic paste | 30 - 45 mins | 28-34 (4060-4930) | Worldwide |
| ET5428 Black | Composite bonding | Thixotropic paste | 30 - 45 mins | 28-34 (4060-4930) | Worldwide |
| ET5429 | Composite bonding | Thixotropic paste | 6 - 10 hours | 23-28 (3335-4060) | Worldwide |
| ET5441 | Thermally conductive | 10,000 - 15,000 | 8 hours | 20 (2900) | Worldwide |