What is silicone? Silicone is a rubber-like elastomer with high-temperature resistance. It is difficult to bond, and the only adhesives which adhere well are silicone based adhesives and cyanoacrylate adhesive after the silicone has been primed with Permabond POP.
Is there a time limit for bonding parts treated with POP?
For many substrates, bonding with Permabond® cyanoacrylate adhesive can be performed up to 2 hours
after POP treatment. When bonding PTFE, we recommended bonding the parts immediately after the
POP dries. In every case, for best results, bond as soon as practical.
What does POP do?
Permabond POP Polyolefin Primer can greatly increase the bond strength of cyanoacrylate bonds on polyolefins (such as polypropylene and polyethylene) and acetal (POM) as well as silicone. It also works
well on fluoropolymers (such as PTFE, FEP, PFA, ETFE). Bond strength on grades of PBT, PMP, PPS, polystyrene, and polyurethane are often improved.
What substrates do not benefit from the use of POP?
•DAP and polyamide: Bond strength decreases with the use of POP.
•ABS: POP provides no appreciable increase in bond strength increase.
What is POP? POP is a primer or adhesion promoter. It is not an accelerator. So it does not increase cure rates or change the pH of acidic surfaces such as wood.
Will it increase the adhesion of epoxy?
No, POP is only for cyanoacrylates. It will not increase the bond strength of other types of adhesives, such as epoxies, UV adhesives, or acrylic adhesives.
Please contact Permabond with any questions.