ISO QMS Certified
"Our Science ... Your Success"

Permabond 743HT

  • Home
  • Permabond 743HT

PERMABOND® 743HT Flexible Highly Thixotropic Cyanoacrylate Adhesive

Permabond 743HT is a highly thixotropic flexible cyanoacrylate adhesive, exhibiting improved peel strengths when compared to other grades. It has excellent impact and vibration resistance, and is suitable for bonding dissimilar materials which could be subject to thermal shock or thermal cycling.

743HT is ideal for use on flexible or semi porous surfaces. It can also be used to bond silicone when used in conjunction with Permabond Polyolefin Primer (POP).

Features and Benefit

  • Thixotropic
  • Flexible, soft material
  • High elongation
  • Easy to apply and dispense
  • Contains no solvent

Cyanoacrylate Directions for Use Video

Surface Preparation Directions for Use Video

Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive.  Strong bonds are developed extremely fast and on a great variety of materials. These properties make PERMABOND cyanoacrylates the ideal adhesives for high-speed production lines.

 

Permabond 743HT

Surface Preparation prior to bonding with Permabond 743HT
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

Permabond 743HT Directions for Use
1) Apply the adhesive sparingly to one surface.
2) Bring the components together quickly and correctly aligned.
3) Apply sufficient pressure to ensure the adhesive spreads into a thin film.
4) Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
5) Any surplus adhesive can be removed with Permabond CA solvent, nitromethane or acetone.
NB:
For difficult or porous surfaces using a Permabond activator is recommended. If bonding polypropylene, polyethylene, PTFE or silicone, prime first with Permabond Polyolefin Primer (POP).

For more information download the Technical Data Sheet

Permabond_TDS_btn

Contact Us

 Your information is always kept private

Products

Recent Blogs

28Jun
Permabond Europe Launches TA4207 – No surface preparation!

Permabond Europe Launches TA4207 – A new versatile, high strength adhesive - Little or no surface preparation required! [caption id="attachment_6591" align="alignnone" width="300"] TA4207 Little or no surface preparation required! Clic...

Read more
27Jun
What are the best plastic to metal adhesives?

Permabond is often asked, "What is the best glue for metal to plastic?".  It is a tough question - it is like asking what is the BEST flavor of ice cream? As we discuss here, there are metal adhesives that bond some plastics and plastic a...

Read more
30May
How to bond acrylic to stainless steel

Bonding acrylic to stainless steel can be accomplished with a variety of different adhesive types including UV curable, structural adhesive and cyanoacrylate.  Each type has its own characteristics.  UV Curable Permabond UV632 was dev...

Read more
10Dec
Blue Center Innovation Technologies

Blue Center Innovation Technologies – Permabond’s new state of the art development, technical service & QC laboratories Misinto, Italy - 28th November 2018 Permabond has a history of developing and manufacturing engineering ...

Read more
09Jul
What is the best glue for rubber?

Permabond 105 is an instant adhesive which bonds most types of rubbers, including Butyl, EPDM, Natural, and Nitrile.  It forms strong bonds in seconds, and the strength continues to increase for 24 hours.  For silicone rubber, use Permabond...

Read more