ISO QMS Certified
"Our Science ... Your Success"

  • Home
  • Surface Preparation

Category Archives: Surface Preparation

UPCOMING: Adhesives & Bonding Conference – featuring special Permabond guest speaker !

Permabond’s Technical Director, Dr Giorgio Zaffaroni will be speaking at the forthcoming “Adhesives and Bonding Expo” to be held at the Suburban Collection Showplace, Novi, MI (USA) Tuesday 24th March. In a series of Roundtable events, Giorgio will be tackling the topic of surface preparation and how new state-of-the-art adhesives can take the drudgery out of having...

Continue reading “UPCOMING: Adhesives & Bonding Conference – featuring special Permabond guest speaker !“ »

Aluminum Adhesives – How to bond aluminum with Permabond Adhesives

Permabond is a global company and you will see both British and American spellings of words throughout this site.  For the most part, my colleagues in the UK are very accepting of American spellings -  until it comes to the word aluminum!  In the interest of global peace I’ll use both spellings.  Whether you call it aluminum adhesive or aluminium glue, Permabond has...

Continue reading “Aluminum Adhesives – How to bond aluminum with Permabond Adhesives“ »

Best practices for bonding low surface energy plastics.

When choosing a plastic adhesive, it can be challenging to find the strongest adhesive.  There are many types of plastic.  Each type has it's own strengths and weaknesses.  Many are easy to bond; others, like polyolefins, can be difficult.  Think of the reasons design engineers want to use polyolefin plastics:  they are slick to the point of lubricating, scratch resi...

Continue reading “Best practices for bonding low surface energy plastics.“ »

What are anaerobic surface conditioners?

Permabond Anaerobic Surface Conditioner - FAQs What are anaerobic activators or anaerobic surface conditioners? Permabond Anaerobic Surface Conditioner (Permabond ASC10) is a fast drying activator for Permabond anaerobic adhesives and sealants.  Permabond ASC 10 contains a solvent that is not ozone depleting. Evaporation of this non-halogenated solvent leaves a thin de...

Continue reading “What are anaerobic surface conditioners?“ »

Comparing Flame, Corona and Plasma Treatment

Why pretreat? Certain plastic substrate materials have a low surface energy which give them a non-stick nature. Typical “offenders” are common plastics such as polypropylene, polyethylene, PTFE (Teflon) plus also some rubbers such as EPDM and Santoprene.  If you wish to bond these materials with industrial adhesive you may have trouble unless: You flame, corona...

Continue reading “Comparing Flame, Corona and Plasma Treatment“ »

Bonding SAN (Styrene-Acrylonitrile)

What is SAN? SAN is a type of plastic material based on styrene chemistry. It is similar to polystyrene but has improved temperature performance, chemical resistance and toughness. It is sometimes blended with other plastics such as ABS. It can also contain fillers such as glass fibre to help strengthen it but in its normal state it is fairly brittle. Luran® SAN and Lus...

Continue reading “Bonding SAN (Styrene-Acrylonitrile)“ »

Bonding Silicone Rubber

Silicone Rubber Silicone is a high performance elastomeric material.  It has a wide variety of uses and is often found used as seals or gaskets due to its flexibility and ability to be compressed between two surfaces.  Other uses include flexible medical devices and tubing, prosthetics, surgical implants and special effects in the film industry. Thanks to its high temp...

Continue reading “Bonding Silicone Rubber“ »

Bonding PTFE with Industrial Adhesive

PTFE adhesive - Bonding PTFE with Industrial Adhesive PTFE, commonly known by the trade name Teflon or by the techies amongst us “Polytetrafluoroethylene” is a notoriously difficult material to bond as it is “Non-Stick” by nature. The most common application would be that of non-stick frying pan coating. Consequently when someone calls the helpline asking for a...

Continue reading “Bonding PTFE with Industrial Adhesive“ »

Glass bonding – Troubleshooting

When Glass Bonding Goes Wrong… Adhesive won’t stick, it is coming clean off the glass: Check surface preparation Joint design – if you have a butt joint this can be problematic as this introduces peel or cleavage stress into the joint. Try to redesign the joint to minimize the peel stress.  You can also build up a fillet or meniscus of adhesive around the ...

Continue reading “Glass bonding – Troubleshooting“ »

How to Prepare & Bond Glass with Industrial Adhesive

Glass is a common material and found in various applications – from windows and doors to glass staircases, balconies and other architectural products. On a smaller scale, items such as kitchenware, artwork, jewellery and lenses also make use of this versatile, clear material. There are many benefits of bonding glass with industrial adhesives: Many adhesives are ...

Continue reading “How to Prepare & Bond Glass with Industrial Adhesive“ »