ISO QMS Certified
"Our Science ... Your Success"

Adhesives

FDA & EU 10/2011 Compliant Adhesive for Food Contact

PERMABOND® ET5162 is an FDA & EU 10/2011 compliant adhesive. It has been formulated to comply with both FA 175.105 and EU food contact regulations 10/2011. It is a two-part, room temperature curing epoxy adhesive, which combines high performance, with fast cure and higher temperature resistance than standard two-part epoxies. ET5162 is suitable for bonding a wi...

Continue reading “FDA & EU 10/2011 Compliant Adhesive for Food Contact“ »

High Temperature Resistant Cyanoacrylate

Permabond introduces new high temperature resistant cyanoacrylate adhesives! PERMABOND® 825 is a low viscosity cyanoacrylate adhesive that provides higher strength at high temperature. This fast-setting cyanoacrylate bonds metals, rubbers, plastics, and more. Permabond 825 resists up to 392°F (200°C) and has excellent retention of strength during thermal aging. PATENTE...

Continue reading “High Temperature Resistant Cyanoacrylate“ »

New no odour adhesives for low surface energy plastics

PERMABOND® is delighted to announce the launch of Permabond TA4630 and TA4631, no odour adhesives for low surface energy plastics, especially developed for difficult to bond plastics such as polypropylene, polyethylene and PTFE, without surface pre-treatment. They can even bond acetal (POM)! Key features of the products include: NO ...

Continue reading “New no odour adhesives for low surface energy plastics“ »

Multi-purpose, high strength adhesive in NEW reduced waste packaging

Combine the convenience and reliability of a multi-purpose, high strength structural adhesive AND go greener at the same time with Permabond's reduced waste packaging! Permabond is responding to customers' demands to reduce packaging waste by launching our popular, multi-purpose, structural adhesive ET5364 in new collapsible cartridges, which can reduce packaging waste by...

Continue reading “Multi-purpose, high strength adhesive in NEW reduced waste packaging“ »

Handy UV adhesive kit for bonding acrylic/Perspex®

Handy UV adhesive kit for bonding acrylic/Perspex® Permabond’s new UV639 adhesive is proving very popular for bonding clear plastic screens and point of sale display assemblies. Permabond Europe is now offering a handy UV adhesive kit which includes the liquid adhesive and a small handheld battery-powered UV torch for curing. This makes it especially convenient for ...

Continue reading “Handy UV adhesive kit for bonding acrylic/Perspex®“ »

Permabond Launches UV639 High Performance Acrylic Bonder

Permabond Launches UV639 High Performance Acrylic Bonder In the world of bonding acrylic (or Perspex®, PLEXIGLASS®, PMMA as it is also known), adhesives used to join this material are often referred to as "acrylic adhesives". This should not be confused with the same term used in the adhesive world, where "acrylic adhesive" refers to the chemical composition of ce...

Continue reading “Permabond Launches UV639 High Performance Acrylic Bonder“ »

Permabond Europe Launches New Thermally Conductive, High Temperature Resistant Epoxy

New Thermally Conductive Epoxy, Permabond ET5441 with High Temperature Resistance! Permabond® ET5441 is a thermally conductive, two-component adhesive based on epoxy resin. It is specifically designed to bond metal substrates when excellent resistance to high temperature is required. Permabond® ET5441 offers high strength performance. Even at 180°C&nbs...

Continue reading “Permabond Europe Launches New Thermally Conductive, High Temperature Resistant Epoxy“ »

Permabond Europe Launches TA4207 – No surface preparation!

Permabond Europe Launches TA4207 – A new versatile, high strength adhesive Permabond TA4207 expands our existing range of methyl methacrylate (MMA) adhesives, and is a 2-part, 1:1 mix ratio product, which achieves very high shear strengths on a wide range of metals, plastics and composites, with little or no surface preparation. In laboratory tests, our chemists ha...

Continue reading “Permabond Europe Launches TA4207 – No surface preparation!“ »

Permabond’s Structural Epoxy Adhesives for Stainless Steel

Permabond launches high strength structural adhesives for tarnish free bonding of stainless steel. Available in convenient 1:1 dual cartridges, once mixed via static mixer nozzle, these adhesives achieve full cure at room temperature (or heat can be applied to speed-up cure). They offer excellent bond strength on stainless steel, composites, plastics wood and other met...

Continue reading “Permabond’s Structural Epoxy Adhesives for Stainless Steel“ »

UL® Classification of Pipe Sealants (thread sealants)

UL® performs various tests to determine the suitability of pipe sealants for a particular use.  The UL® classification does not state the strength of the product or the maximum sealing pressure for other uses. For example, Permabond LH050 is classified by Underwriters Laboratories Inc.® for use in devices handling gasoline, petroleum oils, and natural gas (pressure...

Continue reading “UL® Classification of Pipe Sealants (thread sealants)“ »