ISO QMS Certified
"Our Science ... Your Success"

Normes et conformités

Normes et conformités Permabond

Les produits Permabond ont été testés et validés dans le monde entier pour répondre aux exigences des normes les plus importantes.

  • Norme NSF eau potable
  • Norme WRAS eau potable
  • Norme DVGW eau et gaz
  • Norme BAM oxygène
  • Adhésifs époxydes pour l’industrie alimentaire conformes aux normes FDA
  • Colles non inflammables (classification d’inflammabilité  UL94 V-O)
  • Conformité REACH (SVHC)
  • Conformité RoHS
  • Spéc. Mil (Pour voir la liste cliquez ici)
  • Norme hollandaise KIWA  eau potable
  • Norme australienne AGA  (Australian Gas Association)
  • USP Classe VI
  • ISO 10993 Cytotoxicité médicale
  • ISO 9001 (pour télécharger le certificat cliquez ici)
  • Norme OTAN
  • Spécifications Boeing

Pour vérifier la conformité d’une colle, contactez-nous et nous vous enverrons le certificat ou le document nécessaire.

Contactez-nous pour plus d'informations


Your information is always kept private


Blogs récents

Permabond MT3836 – Flexible, Fire Retardant and Thermally Conductive Adhesive

Permabond is delighted to announce the introduction of Permabond MT3836 - flexible, fire retardant and thermally conductive adhesive. This two-component hybrid system cures fully at room temperature to form a flexible, thermally conductive m...

En savoir plus
Cationic Epoxy/UV Adhesives Cure with UV Light or Heat or Both!

Permabond Europe's new cationic epoxy/uv adhesives cure with UV light or heat or both! Permabond UV7220 (black) and Permabond UV7221 (clear) are epoxy resins that cure when exposed to 365nm UV light, and they can also cure with heat like sta...

En savoir plus
Permabond F201 Toughened, flexible, anaerobic sealant

Anaerobic sealants are characteristically very rigid, hard adhesives which work well in compression, torsion and shear but are notoriously brittle and unsuitable in applications where there could be peel or cleavage forces. When bonding dissi...

En savoir plus
FDA & EU 10/2011 Compliant Adhesive for Food Contact

PERMABOND® ET5162 is an FDA & EU 10/2011 compliant adhesive. It has been formulated to comply with both FA 175.105 and EU food contact regulations 10/2011. It is a two-part, room temperature curing epoxy adhesive, which combines high pe...

En savoir plus
High Temperature Resistant Cyanoacrylate

Permabond introduces new high temperature resistant cyanoacrylate adhesives! PERMABOND® 825 is a low viscosity cyanoacrylate adhesive that provides higher strength at high temperature. This fast-setting cyanoacrylate bonds metals, rubbers, p...

En savoir plus
New no odour adhesives for low surface energy plastics

PERMABOND® is delighted to announce the launch of Permabond TA4630 and TA4631, no odour adhesives for low surface energy plastics, especially developed for difficult to bond plastics such as polypropylene, polyethylene and&nb...

En savoir plus
Permabond Launches UV639 High Performance Acrylic Bonder

Permabond Launches UV639 High Performance Acrylic Bonder In the world of bonding acrylic (or Perspex®, PLEXIGLASS®, PMMA as it is also known), adhesives used to join this material are often referred to as "acrylic adhesives". This sho...

En savoir plus
Permabond Europe Launches TA4207 – No surface preparation!

Permabond Europe Launches TA4207 – A new versatile, high strength adhesive Permabond TA4207 expands our existing range of methyl methacrylate (MMA) adhesives, and is a 2-part, 1:1 mix ratio product, which achieves very high shear strengths...

En savoir plus
Permabond adhesives for polyolefins are also great on rubber, PET, PEEK and acetal!

Permabond’s TA46XX adhesive range is well-known and very popular for its ability to bond low surface energy plastics such as polypropylene, polyethylene, and PTFE, but Permabond adhesives for polyolefins are also great on rubber, PET, PEEK...

En savoir plus