Exposiciones

Anaerobic sealants are characteristically very rigid, hard adhesives which work well in compression, torsion and shear but are notoriously brittle and unsuitable in applications where there could be peel or cleavage forces. When bonding dissi...

PERMABOND® ET5162 is an FDA & EU 10/2011 compliant adhesive. It has been formulated to comply with both FA 175.105 and EU food contact regulations 10/2011. It is a two-part, room temperature curing epoxy adhesive, which combines high ...

Permabond introduces new high temperature resistant cyanoacrylate adhesives! PERMABOND® 825 is a low viscosity cyanoacrylate adhesive that provides higher strength at high temperature. This fast-setting cyanoacrylate bonds metals, rubbers, ...

PERMABOND® is delighted to announce the launch of Permabond TA4630 and TA4631, no odour adhesives for low surface energy plastics, especially developed for difficult to bond plastics such as polypropylene, polyethylene and PTFE, witho...

Permabond Launches UV639 High Performance Acrylic Bonder In the world of bonding acrylic (or Perspex®, PLEXIGLASS®, PMMA as it is also known), adhesives used to join this material are often referred to as "acrylic adhesives". This shoul...

Permabond Europe Launches TA4207 – A new versatile, high strength adhesive Permabond TA4207 expands our existing range of methyl methacrylate (MMA) adhesives, and is a 2-part, 1:1 mix ratio product, which achieves very high shear strength...

Anaerobic sealants are characteristically very rigid, hard adhesives which work well in compression, torsion and shear but are notoriously brittle and unsuitable in applications where there could be peel or cleavage forces. When bonding dissi...