ISO QMS Certified
"Our Science ... Your Success"

Category Archives: Sealants

Anaerobics are for metal only – so why list plastic compatibility?

If anaerobic sealants are only for use on metal why is Permabond LH056 a CPVC Compatible Anaerobic Sealant? The short answer is that Permabond LH056 is designed for use as a metal pipe sealant only – if Permabond LH056 is used on metal pipe work in a fire protection system that also contains CPVC, the CPVC will not be adversely affected. There are various ways of ...

Continue reading “Anaerobics are for metal only – so why list plastic compatibility?“ »

Dispensing Anaerobic Adhesives & Sealants

Manual dispensing from the bottle: When first opened the nozzle will need to be cut to the right diameter to allow dispensing. You can always trim more off the nozzle so err on the side of caution, otherwise you could end up with it gushing out and not be able to backtrack. Use a sharp Stanley knife and do it on a chopping board or protected surface. Blocked nozzle: Thi...

Continue reading “Dispensing Anaerobic Adhesives & Sealants“ »

Anaerobic Adhesive for Sealing Bullets

METHODS OF BULLET SEALING, PRIMER SEALING AND CRIMP SEALING Bullets (or munitions) comprise several components including the actual bullet, casing, primer or pin and of course the explosive gun powder housed inside.  Traditional methods of bullet sealing include use of a bitumous compound or lacquer.  These are a fairly low-cost method of bullet sealing but are fairl...

Continue reading “Anaerobic Adhesive for Sealing Bullets“ »

Permabond Sealant Approved for use in Oxygen Delivery Systems

Permabond® Engineering Adhesives MH052 has BAM approval for use with gaseous oxygen up to 10 bar (145 psi) and 60°C (140°F). Standard anaerobic sealants cannot be used for oxygen-rich systems due to instability, which could cause fire or explosions.  MH052 is a unique formulation which is stable in oxygen rich environments providing a safe means to seal threaded joint...

Continue reading “Permabond Sealant Approved for use in Oxygen Delivery Systems“ »