Permabond 102

PERMABOND 102 Low Viscosity General Purpose Cyanoacrylate Adhesive

Permabond 102 adhesive is a low viscosity general purpose cyanoacrylate adhesive
suitable for bonding close-fitting components. It is fast setting and suitable for use on
plastics, rubber, and metals.
 
Features and Benefits
  • Plastic and rubber bonding
  • Applications requiring fast fixturing
  • Ease of use–no mixing or heat cure
  • Bonds most materials
  • 100% reactive, no solvents
  • Approved to MIL-A-46050C Type II Class 2 (existing designs)

Cyanoacrylate Directions for Use Video

Surface Preparation Directions for Use Video

 

Permabond_TDS_btn

 

Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into
a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive.
Strong bonds are developed extremely fast and on a great variety of materials. These properties make
PERMABOND cyanoacrylates the ideal adhesives for high-speed production lines.

Permabond 102

Permabond 102 cured properties

Surface Preparation prior to bonding with Permabond 102
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

Permabond 102 Adhesive Directions for Use
1) Apply the adhesive sparingly to one surface.
2) Then, bring the components together quickly and correctly aligned.
3) Apply sufficient pressure to ensure the adhesive spreads into a thin film.
4) Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
5) Finally, remove any surplus adhesive with Permabond CA solvent, nitromethane, or acetone.
NB:
For difficult or porous surfaces using a Permabond activator is recommended. If bonding polypropylene, polyethylene, PTFE, or silicone, prime first with Permabond Polyolefin Primer (POP).

For more information, download the Technical Data Sheet.

Permabond_TDS_btn

Let’s Discuss Your Project.

Find out more
Find out more
Find out more