|
Permabond UV Light Curable Adhesives Product Selector
 |
Which Permabond UV Light Curable Adhesive is right for your application? |
| |
|
This table represents a selection of the complete range of Permabond UV light curable adhesives. To discuss your specific application requirements, please call the Permabond Helpline, our technical advisors will recommend the best adhesive from our existing product line or assist in developing a custom formulation.
Products Available in the Americas and Asia
|
Grade
|
Primary
Application
|
Appearance
|
Viscosity (cPs)
|
Fixture time (secs)
Low
powered
4mW/cm2
lamp
|
Tensile strength
(psi)
|
Lap
Shear (psi)
|
Shore D
Hardness
|
Elongation
%
|
Service Temp.
(°F)
|
| UV610 |
High strength
glass to metal |
Translucent
|
900
|
11*
|
2,500
|
1,900-2,3001
|
70
|
95%
|
-55 to 120
(-65 to 250) |
| UV620 |
General purpose,
optically clear, glass bonder |
Optically clear, colorless
|
2,500
|
5*
|
2,300
|
1,300-15001
|
62
|
75%
|
-55 to 120
(-65 to 250) |
| UV625 |
Large gaps and vertical
application, glass bonder |
Clear,
colorless
|
Gel
|
5*
|
2,400
|
1,400- 1,6001
|
65
|
40%
|
-55 to 120
(-65 to 250) |
| UV630 |
Low viscosity, high strength, plastic bonder |
Colorless
|
250
|
6*
|
2,000
|
>1,300**2
|
60
|
110%
|
-55 to 120
(-65 to 250) |
| UV640 |
Medium viscosity, plastic bonding |
Colorless
|
3,500
|
7*
|
1,900
|
>1,300**2
|
59
|
110%
|
-55 to 120
(-65 to 250) |
| UV645 |
High viscosity, easy dispensing. Plastic bonding. |
Clear, colorless
|
10,000
|
7
|
2,000
|
>1300**2
|
65
|
110%
|
-65 to 250
|
| UV649 |
Thixotropic gel. Plastic bonding. |
Clear, colorless gel
|
|
8
|
2,200
|
>1300**2
|
65
|
110%
|
-65 to 250
|
| UV670 |
Metal to glass; flexible |
Colorless
|
2,500
|
7*
|
1,700
|
1,100-
1,3001
|
58
|
85%
|
-55 to 120
(-65 to 250) |
| UV7141 |
UV & anaerobic curing. Bonding ceramic coated glass, glass and metal. |
Clear, colorless
|
1,500
|
15
|
3,000
|
2,000- 2,5001
|
|
|
-65 to 300
|
1 Steel to glass
2 Polycarbonate to polycarbonate
3 Steel to steel
* Cure speed depends on wavelength and intensity of the light source, distance from the light to the bond site, UV transmission of the components and thickness of the adhesive.
** Substrate failure observed
Back to Top
|
|
|
