Permabond Rapid-Curing, Structural Acrylic Adhesives
 |
Which Permabond Structural Acrylic Adhesive is right for your application? |
| |
|
Permabond line of structural acrylics was developed for demanding applications that require high tensile, shear and peel strength as well as maximum shock and impact resistance.
Permabond structural acrylics offer fast fixture and cure at room temperature providing a solution to the continuous demands for increased line speeds while decreasing the manufacturing costs that are associated with heat curing.
Permabond structural acrylics are suitable for bonding a wide variety of substrates offering great material selection. Materials such as metals, glass and composites are easily bonded with Permabond structural acrylics.
Americas/Europe/Asia Product Selector Guide
Permabond two part structural acrylics are available in two categories,
no-mix and bead on bead; neither category requires mixing. For the no-mix products the adhesive is applied to one substrate and the activator is applied to the other. When the substrates are mated the cure will be initiated. This system is ideal for close fitting parts and where extended open time is required. For the bead on bead products, a bead on one part is directly applied over the other. When the substrates are mated sufficient mixing takes place to initiate the cure.
Permabond structural adhesives are supported by a team of sales, customer service and technical professionals. This team will assist you in selecting the proper adhesive for you application or develop a product to meet your application's requirements. The benefits of using Permabond Structural Acrylic adhesives include:
- Room Temperature Cure - eliminates ovens and other equipment.
- Rapid Cure - increases daily output to reduce production costs.
- Non-flammable and Solvent-free - provides a safe and comfortable work environment.
- Versatile - suitable for bonding a wide variety of substrates to increase design freedom.
- Technical Support - application specialists available for assistance with joint design, adhesive selection and production process.
Back to Top
